Dangerous Old Breaker Panels: Zinsco, Federal Pacific, Pushmatic & ITE


Many older San Diego homes still run on breaker panels that were recalled, have documented failures, or are no longer accepted by home insurers. If your panel is one of these, replacement is the safest and most cost-effective fix. SRP Electric replaces problem panels in San Diego and the surrounding areas, including Santee, Poway, El Cajon, and La Mesa.

Which Panels Are Dangerous?


Zinsco. Zinsco panels were widely installed from the 1950s through the 1970s. Their breakers can stick in the ON position, so they fail to trip during an overload or short circuit. That allows wires to overheat inside the wall.


Federal Pacific Stab-Lok. Common in homes built from the 1950s through the 1980s, Stab-Lok breakers have a documented history of failing to trip. They were recalled and are a top concern for home inspectors and insurers.


Bulldog Pushmatic. Pushmatic breakers are known for failing to trip under load. Replacement breakers are hard to find and often overpriced, which makes repairs impractical.


ITE (Federal Pacific Electric). ITE panels share the same issues as other older brands, including breakers that stick and fail to trip. Replacement parts are scarce.

Why Insurance Companies Won't Cover These Panels


Many California insurers now refuse to write new policies, or cancel existing ones, for homes with these panels. Your policy may also require an upgrade at renewal. We provide documentation of completed work for your insurance company once the job is finished.


Signs Your Panel Needs to Be Replaced


  • The brand on the panel is Zinsco, Federal Pacific, Pushmatic, or ITE
  • Breakers that won't stay on, or that feel loose or hot
  • Burn marks, a burning smell, or discoloration around the panel
  • A fuse box or a panel with no visible brand name
  • Your insurer has asked for an upgrade
  • A fishy or burning electrical smell

If you see any of these, schedule a licensed electrician to inspect the panel. Two or more is an urgent call.rce.

What a 100 to 200 Amp Upgrade Includes


Many older homes have 100-amp service, which often can't handle modern loads such as air conditioning, EV chargers, and home offices. A typical upgrade includes:


  • A new 200-amp panel sized for your household
  • Surge protection and proper grounding to current code
  • Permits, SDG&E service coordination, and city inspection
  • Repair or replacement of any wiring the new panel depends on


Panel Maintenance and Breaker Safety,


  • Electrical panels need maintenance approximately every 20 years.
  • Just because a breaker fits doesn’t mean it is functioning properly or is UL listed. Non-listed breakers can cause severe damage, excessive heat, and premature panel failure.
  • Mixing and matching breaker brands can cause severe electrical issues.


Our Process


We start with a whole-home safety assessment and give you a written, itemized estimate before any work begins. We pull permits, coordinate with SDG&E and the city, replace the panel, and schedule the final inspection. We walk you through everything before we leave.

Frequently Asked Questions


  • Is my Zinsco or Federal Pacific panel dangerous?

    Yes. Both brands have documented breaker failures that can allow an overload to cause a fire. Replacement is strongly recommended.

  • Will my insurance drop me because of my panel?

    It can happen. Many insurers now flag these panels at inspection or renewal. Replacing the panel and keeping the paperwork is the most reliable way to keep coverage.

  • How much does a panel replacement cost in San Diego?

    Pricing depends on amperage, the condition of the existing wiring, and permit fees. Every estimate is upfront and itemized before work begins.

  • How long does it take?

    A standard panel replacement usually takes one day. Homes that also need rewiring can take two to four days.

  • Do I need a permit?

    Yes. We handle all permits and inspections as part of every panel project.

Call SRP Electric at (858) 900-8535 for a free estimate.